This machine is used mainly in the fields as building materials, metallurgy, machinery, chemical industry, ceramics, mines, electronics, metal powder, refractory and abrasive materials to grind non-metal materials with high hardness, as diamantine, brown corindon, silicon-carbide, spinelle, dolomite, calcite, bolognian stone, high-alumina vanadine and so on and materials with Moh’s hardness grade 3-9 and humidity below 6%. It does a good job in grinding for ultra fine powder. Finished products granularity is 80-2500 items.

Model Parameter	3R1410	3R2115	3R2615	3、4R2715	高强83	3、4R3016	4R96、3216	5R、4119
Feeding granularity (mm)	<15	<15	<20	<20	<20	<20	<25	<25
Finished products granularity (mm)	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.044	0.125-0.033	0.125-0.044	0.125-0.044	0.125-0.044
Yield for each shift with different materials	0.5-8吨	1-18吨	1.5-2吨	2-28吨	3-33吨	3-40吨	3-48吨	6-66吨
Center shaft peed (cycle/minute)	280	180	160	160	160	160	130	105
Interior(mm)	φ405	φ630	φ780	φ800(830)	φ830	φ880	φ970	φ1270
Diameter of mill roller(mm)	φ140	φ210	φ260	φ270	φ270	φ300	φ320	φ410
Height of mill roller and mill ring(mm)	100	150	150	150	150	160	160	190
Motor of host machine(KW)	Y160M-6-7.5	Y200L-8-15	Y225S-8-18.5	Y225M-8-22	Y225M-8-22	Y225M-8-30	Y225S-4-37	Y280S-4-75
Motor of fan (KW)	Y132S-4-5.5	Y132M-4-11	Y160L-4-15	Y160L-4-15	Y160L-4-15	Y180L-4-22	Y200M-4-30	Y25M-4-55
Motor of analyzer(KW)	Y90L-6-1.1	Y112M-6-2.2	Y112M-6-2.2	Y112M-6-2.2	Y132M-6-2.2	Y132M-6-2.2	YC1200-4A-5.5	YCT200-4B-7.5